Changing The Password - Gateway WBR-100 Installation Manual

7
In the
Access Point
or
stations
stations only
The computers listed are current DHCP clients or have been added
manually to the PC Database on the
not listed, restart the computer.
Select the computers you want to have access to your wireless network.
To select multiple computers, hold down the C
when you click computer names, or click
8
Click
Apply
return to default values, then click
9
Click
Save
and return to default values.

Changing the password

This screen allows you to change the router password from the default (admin)
setting or from the current setting. You will be prompted for the password each
time you attempt to open the Gateway Wireless Router Setup utility.
To change the password:
1
Click
Password
2
In the
New Password
characters).
3
In the
Verify Password
change.
4
Click
Save
and return to the default setting.
section, under
Selected Wireless stations only
, click
Select Stations
to accept your changes or
to accept your Wireless changes or
in the left column. The
field, type the new password (up to 9 alphanumeric
field, type the same password to confirm your
to accept your Password change or
www.gateway.com
Using router settings and features
Allow Internet access by,
. If you clicked
.
menu. If a DHCP client is
Advanced
key (Mac - S
TRL
Select All
to remove your entries and
Cancel
to return to the Wireless screen.
Close
to remove your entries
Cancel
screen opens.
Password
Cancel
click
ALL Wireless
Selected Wireless
key)
HIFT
or .
Select None
to remove your entry
27