Changing Router Options - Gateway WBR-100 Installation Manual

11
Close the PC Database window to return to the Advanced
Features/Configuration window.

Changing router options

To change router Options:
1
Click
Options
opens.
2
In the Backup DNS section, type the backup DNS IP addresses (obtained
from your ISP) if the primary DNS is unavailable.
3
In the TFTP section, click the
If enabled, TFTP (Trivial FTP) can be used to upgrade the router firmware.
Instructions for using TFTP are included with the firmware file.
4
In the UPnP section, click the
new equipment will be automatically detected and configured as it is
attached to your LAN. This is only supported by Windows Me, Windows
XP and later.
Checking the
configuration of devices that are automatically detected and configured.
Leaving it unchecked prevents this.
in the Advanced Configuration section. The Options window
Enable Firmware Upgrade using TFTP
Enable UPnP Services
Allow Configuration
www.gateway.com
check box. If enabled,
check box lets you change the
Advanced features
check box.
49