Using "Pppoe" As Broadband Connection Type - Edimax 3G-6218n User Manual

2-4-4 Using "PPPoE" as broadband connection type

1. If your ISP is providing you Internet access via PPPoE (Point-to-Point Protocol over
Ethernet), select "PPPoE".
Item Name
User Name
Password
Service Name
MTU
Connection Type
Idle Time Out
2. Click "OK" to complete setup.
Description
Input the user name assigned by your ISP here.
Input the password assigned by your ISP here.
Give this Internet service a name (optional).
Input the MTU value of your network connection here. If you
do not know, use the default value.
Please specify a connection type here. There are 3 options:
1. "Continuous" keeps the Internet connection alive all the
time.
2. "Connect on Demand" only connects to the Internet when
you initiate Internet connection.
3. "Manual" connects to the Internet only when the
"Connect" button on this page is clicked, and disconnects
when the "Disconnect" button is clicked.
Specify the amount of time the router waits before shutting
down an idle connection. This option is only available when
"Connect on Demand" is selected.
32