Static Routing - Edimax 3G-6218n User Manual

3-6-5 Static Routing

In most cases, all your computers on local network will use default gateway (generally
provided by your ISP) to access servers on Internet. However, if you have preferred network
route you wish to redirect network traffic, you can use this function to create dedicated
route for specific network destination and bypass default gateway.
Most users will not require this function to access Internet.
Here are descriptions of every setup items:
Item Name
Enable Static Routing
Destination LAN IP
Subnet Mask
Default Gateway
Hop Count
Interface
Add
Reset
Description
Enable static routing function.
Input destination network's address here.
Input the subnet mask of destination network
here.
Input the IP address of the gateway which
leads to this network here.
Input the hop count (the distance between
destination network and this broadband
router) here.
Input the interface which leads to destination
network.
Click to add this static route policy to static
route table.
Click to clear all inputted texts.
104