Table of Contents
Advertisement
www.gateway.com
Feedback on pages
Using the Configuration page
System Operations options
The menu headings also appear at the top of every page. To access the
functionality under the menu heading, click the specific menu heading. The first
time that you connect, On-board Remote Management prompts you for your
username and password, then displays the opening page for that menu.
Default username and password
The default username for On-board Remote Management is guest. The default
password is guest.
The username and password are case sensitive and should be entered in all
lower case letters. The default username and password are valid if no usernames
have been configured.
Time display
The time displayed is either regular time or power-on time. Regular time is
Month/Date/Year time, such as Nov/21/2004 19:28. Power-on time is Power On
Cycles (POC)/Power On Hours (POH), such as POC:00121, POH:00002:07:45.
POC (5-digit number) is the number of times the system has booted since
■
it was manufactured.
POH is the number of hours, minutes, and seconds that the system has
■
been on since the current boot occurred.
If there is feedback from the system when you submit a request, the feedback
appears beneath the submit button. In some cases, you may have to scroll to
see the feedback information.
The Configuration page includes a submenu on the left-hand side of the page.
You can set the system operations, networking, and security options from this
page.
The options listed under System Operations include SCSI ID, Mode,
Compression, Cleaning Tape, Magazines, and System Time.
SCSI ID
You can change the drive's SCSI ID from On-board Remote Management.
To change the SCSI ID:
From any page, click Configuration. The Configuration screen opens.
1
Under System Operations, select SCSI ID.
2
Using the Configuration page
55
Advertisement
Table of Contents
