Change The Login Password - LG Centric PCS150R Pro Installation & Setup Manual

(Continued from previous page)
a) At each of the following prompts, type the year, month, and day, respectively. Note that
all three of these fields require numerical values. Press Enter after each entry.
If applicable, you can also press Enter at each prompt to accept the default value in
square brackets.
Enter new year [2013]>
Enter new month [3]>
Enter new day [6]>
b) At each of the following prompts, type the hour and minute, respectively. Note that the
hour should be entered in 24-hour format. Press Enter after each entry.
If applicable, you can also press Enter at each prompt to accept the default value in
square brackets.
Enter new hour (0-23) [18]>
Enter new minute [49]>
c) The system will display the new time and then prompt for confirmation, for example:
New time: 2013-03-06 18:53:00
Apply? [y/n]
Either, type y and press Enter to apply the new configuration to the system, or type n and
press Enter to return to the Command > prompt without changing the time configuration.
If you apply the new configuration, the system will display confirmation, for example:
Time is set

Change the Login Password

1. Log in to the PCS150R as described on page 19.
2. At the Command > prompt, type pwd and press Enter.
The system prompts for the current password:
Changing password for admin
Old password:
3. Type the current password and press Enter. The system will then prompt you to type and
retype the new password:
New password:
Retype password:
4. Type and then retype the new password at the prompts. Press Enter after each entry.
Once you complete the Password fields successfully, the system displays confirmation:
Password for admin changed by admin.
206-4157
PCS150R Configuration Options (Cont.)
27