Getting Configured (I) - Before Starting Host Software - Behringer B-CONTROL FADER BCF2000 Quick Start Manual

BCF2000 Quick Start Guide
getting configured (i) – before starting host software
Having read "getting connected" – if your BCF2000 has operating system V1.06 or
earlier, you are now at the right stage to upgrade your BCF2000 to V1.07. The current
operating system version number is displayed for 2 seconds during power up. The sys-
ex file, upgrade utility and read-me files can all be downloaded from :
http://www.behringer.com/05_support/bc_download/preset_download.cfm?lang=ENG
filename = BCF_v107.zip
Firmware upgrade BCF2000
If you want to UPGRADE your BCF2000 then please also read attachment #02
BCx2000_Upgrade_03.pdf and attachment #03 Firmware_V1.07_readme.pdf
®
Note : If Windows USB/MIDI driver v1.0.0.2 is already installed – be sure to update driver to
v1.1.1.0 before upgrading the BCF2000 operating system (see "getting connected (i)
above)
®
For Windows
utility program. The necessary file may be downloaded from :
http://www.behringer.com/05_support/bc_download/preset_download.cfm?lang=ENG
filename = Update_Utility.zip
®
Windows update utility for BCF2000/BCR2000
Note : For USB systems - you may upgrade via USB or MIDI, but ensure that the correct port
is selected in the BCF2000 (either U-1 or S-1). MIDI is the more reliable option (S-1).
Note : This procedure will not overwrite the factory presets.
For further information please visit
users who are not using a MIDI utility software, we do provide an update
www.behringer.com BEHRINGER Spezielle Studiotechnik GmbH
Page 5