Behringer B-CONTROL FADER BCF2000 Quick Start Manual page 7

BCF2000 Quick Start Guide
Note : After making any changes to the BCF2000 configuration – whether by sys-ex transfer or
manually using the "LEARN" or "EDIT" functions - do not forget to store these
changes before selecting a new preset or powering off the unit.
Note : the "LEARN" and "EDIT" functions are only available in bC mode.
®
Note : Windows users who are operating the BCF2000 in one of the emulation modes (except
"b-hui") may also use the BCFview status bar to help with "navigation".
You can download the BCFview status bar from
http://www.behringer.com/05_support/bc_download/preset_download.cfm?lang=ENG
filename = BCFview.zip
Virtual Mackie
Note : Always start BCFview.exe before opening your host software.
Note : bC mode only: Some host software packages may require a software adaption to allow
the BCF2000 to be imported as a generic MIDI controller Before you open your host
software you may need to store the software adaption file to a specified location in your
host software files. Where applicable, these software adaption files are included in the
.zip package with the relevant BCF2000 template. Download from :
http://www.behringer.com/05_support/bc_download/preset_download.cfm?lang=ENG
Refer to the appropriate read-me file which was downloaded with the template for more
details.
For further information please visit
® ®
/ Logic Control display tool for Windows
www.behringer.com
®
computers
BEHRINGER Spezielle Studiotechnik GmbH
Page 7