Behringer B-CONTROL FADER BCF2000 Quick Start Manual page 4

BCF2000 Quick Start Guide
Note : each device must be assigned an exclusive device ID in the "global edit" menu.
Note : To enable multiple client operation, Windows
B
USB/MIDI driver v1.1.1.0 (see getting connected (i) above).
EHRINGER
®
Note : Windows 2000 users
connected (i) above). This also allows multi-client capability.
Note : do not expect parameter feedback if this feature is not supported by your
host software !
Note : you may need to add extra control surfaces within your host software (eg Cubase
each subsequent BCF2000 / BCR2000.
®
Note : Logic automatically recognises and configures multiple BCF2000 in L_C mode.
If your host system has only one USB port free, you can create a chain of BCF2000s
and BCR2000s, each time using "MIDI OUT A" to "MIDI IN". The last B-Controller in the
chain is connected to the computer via USB. The port modes will be U-4 for the last unit
(with the USB connection) and S-3 for all others.
Note : Cascading two units via MIDI is described in the user manual. This configuration
supports parameter feedback.
Note : If you are not using USB, you can still add units in a MIDI chain as described above,
but use the MIDI ports instead of USB. The port configuration is S-3 for all units.
Note : Cascading via MIDI is only possible in b_C mode.
Note : Parameter feedback is not supported if three or more units connected via MIDI.
Alternatively, you may use a MIDI splitter / hub.
For further information please visit
must B
use the
EHRINGER
www.behringer.com
®
XP users will also need to install the
USB/MIDI driver v1.1.1.0 (see getting
BEHRINGER Spezielle Studiotechnik GmbH
Page 4
®
) for