The User’S Manual; Before You Get Started; Shipment; Initial Operation - Behringer EURORACK UB1204-PRO User Manual

All manuals and user guides at all-guides.com
EURORACK UB1204

1.2 The user’s manual

The user’s manual is designed to give you both an overview of
the controls, as well as detailed information on how to use them.
In order to help you understand the links between the controls,
we have arranged them in groups according to their function. If
you need to know more about specific issues, please visit our
website at http://www.behringer.com, where you’ll find
explanations of e.g. effects and dynamics applications.
+
For the moment, just try and trace the signal path from the
microphone input to the aux send 1 connector. Don’t be put off
by the huge range of possibilities; it’s easier than you think! If you
look at the overview of the controls at the same time, you’ll be
able to quickly familiarize yourself with your mixing console and
you’ll soon be making the most of all its many possibilities.

1.3 Before you get started

1.3.1 Shipment

Your mixing console was carefully packed in the factory to
guarantee safe transport. Nevertheless, we recommend that
you carefully examine the packaging and its contents for any
signs of physical damage, which may have occurred during
transit.
+

1.3.2 Initial operation

Be sure that there is enough space around the unit for cooling
purposes and to avoid over-heating please do not place your
mixing console on high-temperature devices such as radiators
or power amps. The console is connected to the mains via the
supplied cable. The console meets the required safety standards.
Blown fuses must only be replaced by fuses of the same type
and rating.
+
+

1.3.3 Online registration

Please do remember to register your new BEHRINGER
equipment right after your
www.behringer.com (alternatively www.behringer.de) and
kindly read the terms and conditions of our warranty carefully.
Should your BEHRINGER product malfunction, our goal is to
have it repaired as quickly as possible. To arrange for warranty
service, please contact the retailer from whom the equipment
was purchased. Should your BEHRINGER dealer not be located
in your vicinity, you may directly contact one of our subsidiaries.
Corresponding contact information is included in the original
equipment packaging (Global Contact Information/European
Contact Information). Should your country not be listed, please
contact the distributor nearest you. A list of distributors can be
found in the support area of our website (www.behringer.com).
process your repair claims quicker and more efficiently.
mixing console. All controls, switches and connectors will be
discussed in detail.
via the XLR connector and also features a switchable +48 V
phantom power supply for condenser microphones.
+
connector. Unbalanced devices (mono jacks) can also be
connected to these inputs.
+
LO CUT filter for eliminating unwanted, low-frequency signal
components (75 Hz, 18 dB/octave).
purchase by visiting should always be turned fully counterclockwise whenever you
connect or disconnect a signal source to one of the inputs.
provide boost or cut of up to 15 dB. In the central position, the
equalizer is inactive.

2. CONTROL ELEMENTS AND CONNECTORS

/UB1204FX
-PRO
Registering your purchase and equipment with us helps us
Thank you for your cooperation!
2. CONTROL ELEMENTS AND
CONNECTORS
This chapter describes the various control elements of your

2.1 Mono channels

2.1.1 Microphone and line inputs

Fig. 2.1: Connectors and controls of mic/line inputs
Each mono input channel offers a balanced microphone input
Each mono input also features a balanced line input on a 1/4"
The mono channels of the mixing consoles have a high-slope
Use the GAIN control to adjust the input gain. This control

2.1.2 Equalizer

All mono input channels include a 3-band equalizer. All bands
-PRO
5