Eztune Software; Using The Speaker Bar; Power Management; Energy Declaration - Gateway HD2401 User Manual

EzTune software

When installed onto your computer, EzTune™ software lets you control many of the monitor
settings from your computer. With EzTune, you can:
•
•
•
•
For more information, see the program's CD or the installed program's online help.

Using the speaker bar

speaker bar will not initialize and will not work correctly. If this happens, turn the monitor
off, then back on to enable the speaker bar.
To turn on the speaker bar:
•
To use headphones:
•

Power management

Energy declaration

When connected to a computer that supports the VESA Display Power Management Signaling
(DPMS) Protocol, the monitor can conserve significant energy by reducing power consumption
during periods of non-use. When your computer goes into the energy saving mode, the monitor
will then enter the Active Off mode (sleep). In the Active Off mode the Power LED will still show
orange.
14
Using Your Gateway Flat-Panel Monitor
Change the orientation of the image (landscape to portrait) by just rotating the screen
(requires the optional height-adjustable stand available in the U.S. at www.gateway.com)
Change brightness, contrast, and color balance
Change screen geometry
Set the display position and resolution
Important
If you connect the speaker bar to the monitor while the monitor is turned on, the
The speaker bar is always on. If you connected the speaker bar by following the instructions
in "Setting up the optional speaker bar" on page
from the monitor's speaker bar power connector.
Plug headphones into either of the speaker bar's headphone jacks. The speaker bar's volume
is muted, and sound is played through the connected headphones. You can connect
headphones to both headphone jacks, and sound plays out of both sets of headphones.
4, the speaker bar receives power constantly