Connecting The Power; Connecting A Security Cable - Gateway HD2202 User Manual

Connecting the power

Connect the power:
1
2
3

Connecting a security cable

You can secure your monitor to your computer desk (or to another heavy object) with a cable lock.
To connect a cable lock, follow the cable lock's instructions to connect it to the Kensington lock
slot at the back of your monitor (cable lock not included).
Kensington lock slot
4
CHAPTER 1: Using Your Gateway Flat-Panel Monitor
Position your monitor so you can reach the back, then connect the power cord to the power
connector at the back of the monitor.
Plug the power cord into a correctly grounded power outlet. We recommend using a surge
protector to protect your monitor from voltage spikes.
To make sure that the monitor's power is correctly connected, check the power icon above
the power button. The power icon should be orange. If the power icon is not lit, power is
not connected.