Mackie MDR24/96 Operation Manual page 33

4. The name "Project#1"
appears on the left side of
the LCD screen. A pointer
("v") appears above the
first character of the name
to indicate that you can
change that character.
Press the (–)Dec / (+)Inc buttons to select the character you want in that
position. Select the >> button to move the pointer to the next character.
The MDR24/96 organizes audio files and session information into folders called
Projects. When the MDR24/96 boots up, it automatically opens the last Project
you worked on. We've included two demonstration Projects, Ode to Masters and
Little Bit of Love, to help you get familiar with the MDR24/96 right out of the box.
At this point, you should see the name of the demo Project in the LCD display.
1. Press PROJECT. In the
PROJECT MENU, select
Open.
2. Choose the drive you want to
open the Project on by
selecting either Internal or
External from the Select
Source Drive screen using
the (–)Dec / (+)Inc or << /
>> buttons. The selection
defaults to the drive
containing the currently
open Project. Press NEXT.
3. Use the (–)Dec / (+)Inc or the << / >> buttons to select the desired
Project, then select Open.
Every time you record new audio, the audio data and Project information is
automatically saved to disk. However, if you make other changes to the Project
(setting Locates, editing etc.) without recording new audio, you must save the
Project for these changes to be remembered. In other words, if you quit without
saving, no audio is lost, but your changes are. So once you start editing, save
often.
1. Press the PROJECT
button.
2. From the PROJECT
MENU, select Save.
3. Press the PROJECT or
Page Left (<) button again to exit.
PROJECT B