Gateway Computer Monitor User Manual

SETTING UP YOUR GATEWAY MONITOR
1 1
Connect your monitor to your computer Connect your monitor to your computer
Follow the instructions that came with your computer. Follow the instructions that came with your computer.
Analog VGA Digital DVI
(supplied) (optional*)
Connecting Your Flat Panel LCD Speaker Bar*
1
Tilt the screen back, center the speaker bar below
the screen, then tighten the thumb screws.
* Available at www.gateway.com © 2005 Gateway, Inc. All rights reserved. Gateway is a trademark or registered trademark of Gateway, Inc. in the U.S. and other countries. Product specifications subject to change without notice. Actual product may vary from image shown.
2 2
Plug in the monitor Plug in the monitor
To protect your monitor from power fluctuations, To protect your monitor from power fluctuations,
use a surge protector. use a surge protector.
2 3
Connect the USB power cord to a
USB port on your computer.
3 3
Turn on the monitor Turn on the monitor
Connect the speaker bar' s headphone and microphone
cables to your computer, then turn on the speaker.

Getting Help

See your documentation
Refer to the documentation that came with your monitor
or go to gateway.com to get the online documentation.
Check Gateway Support
For frequently-asked questions, setup help, and
immediate information on common technical issues,
go to gateway.com
MAN FPD2085/2185 POSTER R2 12/05