Appendix A - Troubleshooting
•..PowerLine.AV.configuration.utility.does.not.start.correctly:
Reinstall the utility.
•..PowerLine.AV.configuration.utility.does.not.detect.the.DHP-540.switch.and.DHP-502AV.adapter.:
Please make sure your DHP-540 switch and your DHP-502AV adapter are correctly plugged and connected to the computer or network device.
•. I.can't.configure.any.parameters.on.the.DHP-540.switch.and.the.DHP-502AV.adapter..An.error.is.shown.when.I.try.to.configure.it:
Please make sure you have not unplugged the DHP-540 switch and the DHP-502AV adapter while configuring it.
•..I.changed.the.connection.cable.to.another.Network.adapter.and.now.the.utility.does.not.work.correctly:
Please restart the utility each time you disconnect the connection cable.
•. I'm.having.a.lot.of.problems.configuring.my.network:
If you are having problems configuring the network with two or more PowerLine AV 500 adapters, please make a reset to all of the adapters and
start configuring the adapters again. To test whether the electrical wiring is contributing to the problem, plug the PowerLine adapters in the
same room.
D-Link DHP-541 User Manual
Troubleshooting
26