Section 3 - Configuration
Name:
Displays the name of the devices that have been
discovered. The device's name is initially set by
the utility itself.
Location:
Displays if the device is local or remote.
Mode:
Displays the PowerLine Mode.
Rate:
Displays the link rate of the connected to the
PowerLine device.
Device Password:
Displays the password of the devices that have
been discovered. The device's password is initially
set by the utility itself.
Edit:
Click to edit the settings to the highlighted device.
Scan:
Click to scan your network for PowerLine devices.
Encryption Key:
Enter an encryption key to apply to your
PowerLine devices.
Use Default:
Click to use the default encryption key.
Click Apply to save your settings.
Apply:
D-Link DHP-541 User Manual
Network Info
21