Panels - GE 36" Built-In Bottom-Freezer Installation Instructions Manual

Installation Instructions
[STEP IOA] INSTALL OVERLAY PANELS
Right hand models shown. Use the same instructions
for left hand models.
- UseFrontHoles
to SecureHandle
UseRearHoles
to SecureTrim
Handle
Trim
Move
Forward
For3/4"
Panel
DoorTrim
Refrigerator
Door
ii!i!!i!i!iiiii!!!!!i
Supplied handle shown in the
overlay panel position.
i
T
Install door and drawer panels:
, Open door to 90°. Remove the 4 Phillips head screws
from the door handle.
, Remove handle. Retain all screws.
, Remove a screws holding trim. lift off trim.
Retain screws.
, Slide overlay panel into the door trim.
, There are two sets of holes in the handle side trim.
Replace handle side trim by installing the original screws
in the REARscrew holes.
, Secure the handle to the door using the FRONT
screw holes.
, Follow the same procedures to install the drawer panel.
Custom handles
If you ore using custom handles, the handle must be
properly secured to the panel before sliding the panel
into the trim.
, The cabinet manufacturer will supply the custom
handle and hardware.
, Secure the door/drawer trim using both the FRONT
and REARscrew holes. Discord supplied handle.
15