GE 36" Built-In Bottom-Freezer Installation Instructions Manual page 14

Installation Instructions
,ISTEP 101 INSTALL 1/4" FRAMED PAN ELS Right
hand models shown. Use the same instructions
for left hand models.
IF YOU ARE INSTALLINGOVERLAYPANELS,
GO TO STEP10A.
Handle
Trim
DoorTrim
Refrigerator
Door
UseFrontHoles
to SecureTrim
UseRearHoles
to SecureHandle
Standard supplied handle shown
in 1/4" panel position.
Install door and drawer panels:
• Open door to 90°. Remove the 4 Phillips head screws
from the door handle.
• Remove handle. Retain all screws.
• Remove 4 screws holding trim, lift off trim.
Retain screws.
• Slide framed panel into the door trim.
• There are two sets of holes in the handle side trim.
Replace handle side trim bu installing the original screws
in the FRONTscrew holes.
• Secure the handle to the door using the REAR
screw holes.
• Follow the same procedures to install the drawer panel.
14