Introduction; Automatic Power Engage - Zeta ZD-SI-610/ZD-SO-610 User Manual

INTRODUCTION

This user manual covers the following two
products, Zeta ZD-SI-610 (Ionisation) Smoke
Alarm and ZD-SO-610 Toast Proof (Optical)
Smoke Alarm.
Congratulations! You've made a wise
investment in an innovative product and
your personal safety. The Zeta smoke
alarms covered by this manual form part
of a new generation of domestic life safety
products from Zeta Alarm Systems. The
Zeta range of products is constantly being
improved and expanded. Please visit www.
zetaalarmsystems.com to find out about the
latest additions to our product range.
IMPORTANT:
contains
regarding the operation of your Zeta smoke
alarm. Ensure you read this user manual fully
before installing and operating the alarm. If
you are installing this smoke alarm for use by
others, you must leave this manual (or a copy
of it) with the end user.
2
This user
important information
AUTOMATIC POWER
Your 10 year life smoke alarm is powered by
an internal lithium-ion power pack. To avoid
unnecessary use of the power pack prior to
installation, and to ease disposal when the
alarm reaches the end of its life, the alarm is
supplied with the power pack in a deactivated
state. The power pack is automatically
enabled when the alarm is correctly attached
to the mounting plate.
WARNING: This automatic power
engage system only applies to the
following 10 year smoke alarms:
ZD-SI-610, ZD-SO-610
ZD-WSI-610, ZD-WSO-610
manual
IMPORTANT: Your alarm will not work
until it is correctly located and secured
on the mounting plate.
The mounting plate includes a small magnet
as illustrated below. Ensure the magnet is in
position prior to attaching the alarm.
ENGAGE
Magnet (Silver
in colour)