Table of Contents
Advertisement
OPERATION
Normal condition
The red LED on the front should flash every
40 seconds to show the alarm is active.
Low Power Pack Condition
IMPORTANT: Your smoke alarm requires
the power pack to have sufficient capacity of
power to operate correctly.
Should your Zeta smoke alarm enter a low
power pack condition, the unit will emit an
audible 'chirp' once every 40 seconds.
When this occurs you must replace the alarm
immediately. Your Zeta smoke alarm will
continue to warn of this low power pack
condition for at least 7 days, however, failure
to change the alarm after this time would
mean your smoke alarm has insufficient power
to alert you in a real fire situation. When the
alarm is removed from the mounting plate
the power pack will automatically deactivate
and the low power warning chirp will stop,
allowing you to dispose of the alarm.
For disposal see page 25.
10
ALARM TEST
a Press the test button in the centre and
release.
b The unit will emit a loud (85dB at 3
meters) alarm for around 5 seconds and
stop automatically.
Advertisement
Table of Contents
