Insignia NS-19E310A13 User Manual page 15

Insignia 19" LED TV
Using DVI (same as HDMI but requires an audio
connection)
Note
You must use the HDMI 1 (DVI) jack to connect a
cable or satellite box using DVI. If you use
HDMI 2 (ARC) jack, you will not hear sound from the
TV speakers.
To connect a cable or satellite box using DVI:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
cable or satellite box.
4 Connect the other end of the cable to the
HDMI 1 (DVI) jack on the back of your TV.
5 Connect a 3.5mm audio cable (not provided) to
the PC/DVI AUDIO jack on the back of your TV
and to the AUDIO OUT jacks on the cable or
satellite box.
Note
When you connect the audio using the PC/DVI
AUDIO jack, the audio output is analog.
6 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
7 Go through the Setup Wizard on page 20.
Cable or satellite box
Back of TV
www.insigniaproducts.com
Using component video (better)
To connect a cable or satellite box using
component video:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect a component video cable (not
provided) to the VIDEO/Y, P
jacks on the side of your TV and the component
video out jacks on the cable or satellite box.
Cables are often color-coded
to match color-coded jacks.
Cable or satellite box
4 Connect an audio cable (not provided) to the
AUDIO L/R jacks on the side of your TV and to
the audio out jacks on the cable or satellite TV
box.
Note
• The VIDEO/Y, P
connect a component device) share the
AUDIO L/R jacks with the Y/VIDEO jack (used to
connect a composite device).
• When you connect the audio using the
AUDIO L/R jacks, the audio output is analog.
5 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
6 Go through the Setup Wizard on page 20.
, and P video
B R
Side of TV
Audio cable
Component video cable
, and P video jacks (used to
B R
11