Tv Components; Package Contents; Front - Insignia NS-19E310A13 User Manual

Insignia 19" LED TV
3 Attach the wall-mount bracket to your TV using
the mounting holes on the back of your TV. See
the instructions that came with the wall-mount
bracket for information about how to correctly
hang your TV.
Note
• The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with
the wall-mount bracket for screw lengths.
• The mounting holes on the back of your TV take
type M4 screws.
3.07 in. (75 mm)
Wall-mount brackets
www.insigniaproducts.com

TV components

Package contents

• Remote control and batteries (2 AAA)
• Stand base and screws (2)
• TV Wall-mount screws (4)
• Power cord
• Quick Setup Guide
• Important Information

Front

# Item Description
Receives signals from the remote control. Do not
1
Remote control sensor
block.
Turns off when your TV is on.
2
Power indicator
Lights red when your TV is off (standby mode).
Press to open the on-screen menu. For more
3
MENU information, see
page 23.
Press to open the Input Source list, press
to select the video input source, then press INPUT
again. For more information, see
4
INPUT
video input
In menu mode, press to confirm selections.
5
VOL+/VOL– Press to increase or decrease the volume.
Press to go to the next or previous channel in the
6 channel list. For more information, see
CH /CH
channel" on page 24.
Press to turn your TV on or off (standby mode).
Warning: When your TV is off, power still flows
7
(power)
through it. To completely disconnect power, unplug
the power cord.
"Navigating the menus" on
or
"Selecting the
source" on page 22.
"Selecting a
5