Introduction; Inlink; Installing The Stand Or Wall-Mount Bracket; Installing The Stand - Insignia NS-19E310A13 User Manual

Introduction

Congratulations on your purchase of a high-quality
Insignia product. Your NS-19E310A13 represents
the state of the art in LED TV design and is designed
for reliable and trouble-free performance.

INlink

Enjoy the benefit of having HDMI CEC compatible
products plug and play! No setup is needed! CEC
technology lets different components discover and
communicate with each other. (See page
instructions on how to use INlink.)
Installing the stand or
wall-mount bracket
Notes
• If you plan to wall-mount your TV, do not install
the stand.
• Store the stand and stand screws in case you
decide to use the stand in the future.

Installing the stand

To install the stand:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
4
Insignia 19" LED TV
44 for
www.insigniaproducts.com
NS-19E310A13 Insignia 19" LED TV
2 Secure the stand to the screen with the two
provided screws.
Screw type Screw length # of screws
M4

Installing a wall-mount bracket

Warning
This TV is intended to be supported by a UL Listed
wall mount bracket with suitable weight/load. (See
"Miscellaneous" on page 55.)
To attach your TV to a wall-mount bracket:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Remove the four screws that secure the stand
column to the TV, then remove the stand
column.
10 mm 2