Using The Gsc ™ 10; Using The Weight Scale - Garmin FR60 Owner's Manual

Getting Started
5. Use UP and down
calibration distance to the actual
distance.
6. Press ENTER
calibrated distance.
Manual Calibration
If your foot pod distance seems
slightly high or low each time you
run, you can manually adjust the
calibration factor.
1. Press MODE
SPORT > RUN
CALIBRATE
2. Use UP and down
calibration factor.
3. Press ENTER
calibration factor.
Turning Off the Foot Pod
After 30 minutes of inactivity, the
foot pod automatically turns off to
conserve the battery.
0
to adjust the
to save the
> SETTINGS >
> FOOT POD >
> MANUAL.
to adjust the
to save the
Using the GSC
Your watch is compatible with the
GSC 10 speed and cadence sensor
for bikes. The GSC 10 is an optional
accessory that is available at
http://buy.garmin.com.

Using the Weight Scale

If you have an ANT+ compatible
weight scale, the FR60 can read the
data from the weight scale.
1. Press and hold
the FR60 starts scanning.
2. Stand on the scale when
indicated.
nOTE: If using a body
composition scale, remove shoes
and socks to ensure that all body
composition parameters are read
and recorded.
3. Step off the scale when indicated.
nOTE: If an error occurs, step off
the scale. Step on when indicated.
FR60 Owner's Manual
10
™
LIGHT/ until