Table of Contents
Advertisement
T84H_setup0915_final.fm Page 22 Monday, September 25, 2000 7:40 PM
22
If you have a problem setting up or using your monitor, you may be able to
solve it yourself. Before calling your retailer or IBM, try the suggested actions
that are appropriate to your problem.
Possible
Problem
Cause
Computer
There is
doesn't boot
another
after the
graphics
graphics
adapter in the
adapter is
computer
installed
The screen
image is
The display
garbled or
driver is trying
unusable
to use a
(rolling screen
setting your
images,
monitor
overlapping
doesn't
screen images
support
or a blank
screen)
Troubleshooting
Suggested Action
Š
Remove the other
graphics adapter plugged
into one of the expansion
slot.
Š
If the card is built-in to
the motherboard, check
your system manual for
instructions on how to
disable the built-in adapter.
Š
Select the correct
monitor again.
Reference
Connecting
your Monitor
for Analog
section on
page 5
Connecting
your Monitor
for Analog
section on
page 5
Advertisement
Table of Contents
