Table of Contents
Advertisement
Safety Precautions
Avoid placing the monitor, or any other heavy object, on the power cord to prevent it from fire or
electrical shock.
Do not expose the monitor to rain, excessive moisture, or dust to avoid fire or shock hazard.
Do not cover the slots or openings of the monitor for proper heat dissipation.
Always put the monitor in a place where there is adequate ventilation.
For optimal viewing avoid placing the monitor against a bright background or where sunlight or other
light sources may reflect on the face of the monitor. Place the monitor just below eye level.
Handle with care when transporting the monitor.
Do not touch the screen except when lightly cleaning it with a soft cloth.
For some individuals, prolonged use of a stereoscopic monitor may cause discomfort. Take a break
from stereo viewing if you sense eye fatigue or other symptoms. Individuals who are unaccustomed
to using stereoscopic 3D monitors may require a period of adaptation.
Cleaning Your Monitor
Please carefully follow the guidelines below when cleaning the monitor.
Always unplug the monitor before cleaning.
Use a soft cloth to wipe the screen and cabinet front and sides.
About Power Cable
Check first to make sure that the power cord you use is the correct type required for your area.
This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V
AC voltage area. No user-adjustment is required.
Plug one end of the power cord to the AC Inlet, plug another end to a proper AC outlet.
For unit using at 120 V AC: Use a UL Listed Cord Set, Type SVT wire and plug rated 10 A/125 V.
For unit using at 220/240 V AC (outside of U.S.): Use a Cord Set consisting of H05VV-F cord and plug
rated 10 A, 250 V. The cord set should have the appropriate safety approvals for the country In which
the equipment will be installed.
3
Advertisement
Table of Contents
