Table of Contents
Advertisement
For the Quadro graphics cards, go to the nVidia Control Panel and enable stereo
in the "Manage 3D Settings" tab.
When connecting the 3D Vision Ready monitor:
For boards with the stereo connector, select "On-board DIN connector
(with NVIDIA IR Emitter)" and plug in the 3 pin mini-din to 1/8" stereo cable
that came with your 3D Vision glasses kit.
For boards without the mini-din select "Generic Active Stereo (with NVIDIA
IR Emitter). "
Note: Make sure the display refresh rate is set at 110Hz or 120Hz.
11
Advertisement
Table of Contents
