4K at 60Hz streaming, media playback, a sleek design and commercial functionality in an affordable 4K digital signage solution. Featuring an elegant design with logo-free narrow bezel and slim profile, the Planar Simplicity M Series is the ideal display solution for digital signage applications in retail stores, restaurants, medical offices, corporate meeting areas and hospitality.
Safety Information Before using the Planar Simplicity M Series, please read this manual thoroughly to help protect against damage to property, and to ensure personnel safety. Be sure to observe the following instructions. For your safety, be sure to observe ALL the warnings detailed in this manual.
9. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from any Planar large format LCD display. 10. Only use the attachments/accessories specified by the manufacturer.
20. USB Media play function may need to be restarted after ESD discharge to back of display. Informations sur la sécurité Avant d'utiliser le Série Planar Simplicity M, veuillez lire attentivement ce manuel pour éviter tout dommage matériel et assurer la sécurité du personnel. •...
16. Les supports muraux doivent être sécurisés. Le mur doit être suffisamment solide pour supporter les supports, les câbles et les accessoires des écrans. Des ingénieurs sismiques devraient être consultés dans les zones sujettes aux tremblements de terre. Planar Simplicity M Series User Manual Page | 10 020-1429-00A...
Page 11
LCD. Soyez prudent lorsque vous manipulez des objets près de l’écran. 20. Il peut être nécessaire de redémarrer la fonction de lecture multimédia USB après une décharge ESD à l’arrière de l’écran. Planar Simplicity M Series User Manual Page | 11 020-1429-00A...
75”: SLM752 | SLM752-T 86”: SLM862 | SLM862-T Planar recommends turning off the power for 12 hours per day for optimal performance. For complete warranty details, please visit www.planar.com/warranty. Planar Simplicity M Series User Manual Page | 12...
Important Waste Disposal Information Please recycle or dispose of all electronic waste in accordance with local, state, and federal laws. Additional resources can be found online at http://www.planar.com/about/green/. The crossed-out wheelie bin symbol is to notify consumers in areas subject to Waste Electrical and Electronic Equipment (WEEE) Directive 2012/19/EU that the product was placed on the market after August 13, 2005 and must not be disposed of with other waste.
ENERGY STAR rating. For more information on the ENERGY STAR program, refer to energystar.gov. Planar Simplicity M Series User Manual Page | 14 020-1429-00A...
VESA Mounts, General Description VESA mounts are used to secure the Planar Simplicity M Series display. The display can be installed using a variety of VESA mounts available through Planar. If you do not have a VESA mount, and would like to purchase one, contact Planar.
Do not let cleaner seep into the display, as it may cause electrical shock or damage. Refer to the Planar Display Cleaning Guidelines for more information. Planar Simplicity M Series User Manual Page | 16 020-1429-00A...
One per box. HDMI Cable HDMI cable. AC Power US power cord. Cord (US) AC Power EU power cord. Cord (EU) IR Extender Receive signals Cable from the remote control. Planar Simplicity M Series User Manual Page | 17 020-1429-00A...
Page 18
DB9 Adapter male) to DB-9 (female) adaptor. Quick Start Quick start Guide guide. USB A-to-B Connects to a Cable PC for touch functionality (touch models only) Passive Touch models Stylus only. Planar Simplicity M Series User Manual Page | 18 020-1429-00A...
Use the cable clips included in the Accessory Kit to assist with cable management. These clips adhere into place using adhesive backing. Attach clips near HDMI and AC power cables to assist with cable routing and to release cable strain. Planar Simplicity M Series User Manual Page | 19 020-1429-00A...
IR (OUT): 3.5mm TRS (female) IR (IN): 3.5mm TRS (female) AUDIO LINE (OUT): 3.5mm TRS (female) Micro SD VGA IN: DE-15 (female) AUDIO LINE (IN): 3.5mm TRS (female) AC IN: IEC C14 AC ON/OFF Planar Simplicity M Series User Manual Page | 21 020-1429-00A...
IR (OUT): 3.5mm TRS (female) IR (IN): 3.5mm TRS (female) AUDIO LINE (OUT): 3.5mm TRS (female) Micro SD VGA IN: DE-15 (female) AUDIO LINE (IN): 3.5mm TRS (female) AC IN: IEC C14 AC ON/OFF Planar Simplicity M Series User Manual Page | 22 020-1429-00A...
IR (OUT): 3.5mm TRS (female) IR (IN): 3.5mm TRS (female) AUDIO LINE (OUT): 3.5mm TRS (female) Micro SD VGA IN: DE-15 (female) AUDIO LINE (IN): 3.5mm TRS (female) AC IN: IEC C14 AC ON/OFF Planar Simplicity M Series User Manual Page | 23 020-1429-00A...
IR (OUT): 3.5mm TRS (female) IR (IN): 3.5mm TRS (female) AUDIO LINE (OUT): 3.5mm TRS (female) Micro SD VGA IN: DE-15 (female) AUDIO LINE (IN): 3.5mm TRS (female) AC ON/OFF AC IN: IEC C14 Planar Simplicity M Series User Manual Page | 24 020-1429-00A...
IR (OUT): 3.5mm TRS (female) IR (IN): 3.5mm TRS (female) AUDIO LINE (OUT): 3.5mm TRS (female) Micro SD VGA IN: DE-15 (female) AUDIO LINE (IN): 3.5mm TRS (female) AC ON/OFF AC IN: IEC C14 Planar Simplicity M Series User Manual Page | 25 020-1429-00A...
SLM862: 4 units max per 20A circuit for 115V operation Cable runs Ventilation and cooling requirements If hanging display on a wall, location of studs in the wall Planar Simplicity M Series User Manual Page | 26 020-1429-00A...
4K @ 50/60Hz: 5m (15 ft) maximum 4K @ 24/25/30Hz: 15m (50 ft) maximum 1080p @ 60Hz and lower resolutions: 20m (65 ft) maximum USB-C 2m maximum Planar Simplicity M Series User Manual Page | 27 020-1429-00A...
Operating the Display OSD Keypad The OSD keypad is located on the rear of the display. SLM432 / SLM502 / SLM552 SLM652 / SLM752 / SLM862 Planar Simplicity M Series User Manual Page | 28 020-1429-00A...
The remote control receiver is located on the front of the display near the bottom right corner. The IR extender cable can be used if remote control reception is needed in a different location. Planar Simplicity M Series User Manual Page | 29...
The LED indicator light is located on the front of the display near the bottom-right corner. LED On Power Status Condition Green Power on Standby Power save mode Red / Green Blinking IR codes received AC off Planar Simplicity M Series User Manual Page | 30 020-1429-00A...
Installations where the display is tilted downward or upward at an angle may also be prone to these issues and are not recommended. Note: Failure to follow these instructions will void the warranty. Planar Simplicity M Series User Manual Page | 31 020-1429-00A...
The carrier frequency is 38 kHz, with the modulated pulses having a 33% duty cycle. • Commands are sent at a maximum rate of 9 Hz. For example, below is the NEC control code for the ON button of the Planar Simplicity M Series remote control (assuming the default address is used). Binary...
Page 33
[Green] 0x42BD 0x6E 0x42BD6E91 Green button [Yellow] 0x42BD 0x6F 0x42BD6F90 Yellow button [Blue] 0x42BD 0x70 0x42BD708F Blue button 0x42BD 0x01 0x42BD01FE '1' numeric entry 0x42BD 0x02 0x42BD02FD '2' numeric entry Planar Simplicity M Series User Manual Page | 33 020-1429-00A...
Page 34
0x06F929D6 Selects the HDMI 1 input HDMI 2 0x06F9 0x2A 0x06F92AD5 Selects the HDMI 2 input 0x06F9 0x2E 0x06F92ED1 Selects the USB-C input 0x06F9 0x2F 0x06F92FD0 Selects the VGA input Planar Simplicity M Series User Manual Page | 34 020-1429-00A...
Page 35
Operating the Display Planar Simplicity M Series User Manual Page | 35 020-1429-00A...
4. Test that the pairing is successful by pressing a remote control key, such as the HOME key. If the key is not accepted by the display, check the Monitor ID setting in the OSD matches the ID code selected on the remote control. Planar Simplicity M Series User Manual Page | 36 020-1429-00A...
,,, and OK to navigate through the menus and 2. Within the menu, use adjust options. 3. Press BACK to return to the previous menu. To exit the menu system, press HOME. Planar Simplicity M Series User Manual Page | 37 020-1429-00A...
Operating the Display 14.6 Battery Replacement/Installation 1. Remove the battery cover. 2. Remove the batteries. 3. Verify the orientation of the replacement battery for each compartment. Planar Simplicity M Series User Manual Page | 38 020-1429-00A...
Page 39
Operating the Display 4. Install the batteries. 5. Replace the battery cover. Planar Simplicity M Series User Manual Page | 39 020-1429-00A...
The pre-installed apps may be updated by their respective developers without prior notice. APKs installed by the user are not guaranteed to operate by Planar. Google Play is not supported. For questions or support regarding third-party apps, please contact the app vendor.
Page 41
Signage Display Name field. c. Manual Setup i. Signage Display Name 1. Assign a name to the display. By default, this is “PD_” plus the MAC address of the display. Planar Simplicity M Series User Manual Page | 41 020-1429-00A...
Page 42
Operating the Display ii. Security Setup 1. Enable RS232 Network port or allow installation of Unknown Sources. Planar Simplicity M Series User Manual Page | 42 020-1429-00A...
Page 43
1. Enable SSH to be able to send RS232 commands over an encrypted connection. Network Setup 3. If using the network connection, press Next to set up. 4. Otherwise, press Skip to advance to the next topic. Planar Simplicity M Series User Manual Page | 43 020-1429-00A...
Page 44
Clone Media Files to Internal Storage 7. Import media files previously saved to an SD card or USB storage device using the Clone Media Files feature in the Android OSD (see page 77). Planar Simplicity M Series User Manual Page | 44 020-1429-00A...
Page 45
Operating the Display Setup Complete 8. Initial configuration is now complete. Press finish to begin using the display. Planar Simplicity M Series User Manual Page | 45 020-1429-00A...
Below are the menus used for selecting the input sources for all models: 16.1 Source Options Options: HDMI 1, HDMI 2, VGA, USB-C, Media Player, Browser, CMS, Android, Android App Planar Simplicity M Series User Manual Page | 46 020-1429-00A...
You can use the touch screen to control your Windows, Mac or Linux operating system. The Planar Simplicity M Series is HID compliant, delivering up to 20 points of touch on SLM432 / SLM502 / SLM552 / SLM652 / SLM752/SLM862 touch models on both Windows and Linux without a driver.
Range: 0~100 Default: 0 Brightness Increase or decrease the brightness of the picture. Press to select the desired level. Range: 0~100 Default: 50 Planar Simplicity M Series User Manual Page | 48 020-1429-00A...
Page 49
Range: 0~255 o Default: 128 Blue Gain o Adjust the amount of blue in bright content. Press to select the desired level. o Range: 0~255 o Default: 128 Planar Simplicity M Series User Manual Page | 49 020-1429-00A...
Page 50
Overscan Adjust the zoom (overscan) of the image. Options: Off, On Default: Off Picture Reset Reset all setting in the Picture menu to their default values. Planar Simplicity M Series User Manual Page | 50 020-1429-00A...
Range: 0~100 Default: 50 Aspect Ratio Adjust the aspect ratio of the screen. Options: Fill, 4:3, Native, 21:9, Custom Default: Fill Planar Simplicity M Series User Manual Page | 51 020-1429-00A...
Page 52
Note: This feature does not continually reacquire the signal. Screen Reset Reset all settings in the Screen menu to their default values. Planar Simplicity M Series User Manual Page | 52 020-1429-00A...
Range: 0~100 Default: 50 Volume Adjust the sound. Press to select the desired level. Range: 0~100 Default: 20 Planar Simplicity M Series User Manual Page | 53 020-1429-00A...
Page 54
Options: Off, On Default: Off Internal Speaker Select the audio source to play through the display’s internal speakers and audio outputs Options: Off, On Default: On Planar Simplicity M Series User Manual Page | 54 020-1429-00A...
Options: On, Off, Last Status Default: On Panel Saving Brightness o Automatically limit the backlight intensity in order to reduce power consumption o Options: Off, On o Default: Off Planar Simplicity M Series User Manual Page | 55 020-1429-00A...
Page 56
Playlist Select the media player playlist to play at power up, if the Media Player source is selected as the power up input. Options: 0-7 Default: 0 Planar Simplicity M Series User Manual Page | 56 020-1429-00A...
Page 57
USB-C: USB-C Configuration 1 Reset Reset all settings in the Configuration 1 menu to their default values. Factory Reset Reset all settings in all menus to their default values. Planar Simplicity M Series User Manual Page | 57 020-1429-00A...
Select the OSD orientation. This setting is only available on the following inputs: Media Player, Browser, CMS, Android, Android App. Range: Landscape, Portrait Default: Landscape Note: The Simplicity M Series does not support installing the panel in portrait orientation. Planar Simplicity M Series User Manual Page | 58 020-1429-00A...
Page 59
Options: 1~255 Default: 1 Thermal Status Read the internal temperature of the display Monitor Information This read-only menu provides information on the display and its firmware version Planar Simplicity M Series User Manual Page | 59 020-1429-00A...
Page 60
Select RGB range for HDMI and DisplayPort sources. Options: Auto, Full Range, Limited Range Default: Auto Configuration 2 Reset Resets all settings in the Configuration 2 menu to their default values Planar Simplicity M Series User Manual Page | 60 020-1429-00A...
Keypad Lock Lock or unlock the keypad controls Options: Unlock, Lock All, Lock all but Volume, Lock All but Power, Lock All Except PWR & VOL Default: Unlock Planar Simplicity M Series User Manual Page | 61 020-1429-00A...
Page 62
Lists the NTP server that will be used to automatically obtain the current date and time. Current Date and Time o Displays the current date and time configured in the display. Planar Simplicity M Series User Manual Page | 62 020-1429-00A...
Page 63
Options: Sun, Mon, Tue, Wed, Thu, Fri, Sat o Default: None Every Week o Indicate whether the schedule is for the current week only, or for every week going forward. o Options: Off, On Planar Simplicity M Series User Manual Page | 63 020-1429-00A...
Page 64
Default: Off HDMI CEC Standby Select whether to power off other HDMI devices via CEC when the display is powered off. Options: Off, On Default: Off Planar Simplicity M Series User Manual Page | 64 020-1429-00A...
Page 65
Chinese, Japanese, Portuguese Default: English OSD Transparency Adjust the transparency of the OSD menu. Press to select the desired level. Options: Off, 5~100 percent Default: Off Planar Simplicity M Series User Manual Page | 65 020-1429-00A...
Page 66
Note: Startup time can be reduced by using Wake On Signal or Always On. Advanced Settings Reset Resets all settings in the Advanced Settings menu to their default values. Planar Simplicity M Series User Manual Page | 66 020-1429-00A...
To access the Android menu, open the Source menu and select Android. Note: In addition to the IR remote control, use a USB keyboard and mouse to navigate the Android menu and modify settings. 19.2 Settings Planar Simplicity M Series User Manual Page | 67 020-1429-00A...
Enable the Wi-Fi interface. Turn on switch at the top of the menu to enable Wi-Fi network selection. o Note: Wi-Fi support is only available with the TP-Link TL-WN725N USB adapter. Other Wi-Fi dongles are not supported at this time. Planar Simplicity M Series User Manual Page | 68 020-1429-00A...
Page 69
Configurable if Static IP is enabled. DNS 2 o The address of the secondary DNS server used by the display’s network interface. o Configurable if Static IP is enabled. Planar Simplicity M Series User Manual Page | 69 020-1429-00A...
Operating the Display MAC Address o The MAC address of the display’s network interface. Signage Display Planar Simplicity M Series User Manual Page | 70 020-1429-00A...
Page 71
Select a boot animation to be used when the Splash Screen setting is set to User. o Note: Refer to “Creating a Custom Splash Screen Logo” on page 85 for more information. Planar Simplicity M Series User Manual Page | 71 020-1429-00A...
Page 72
Operating the Display Server Settings Planar Simplicity M Series User Manual Page | 72 020-1429-00A...
Page 73
Default: Disable Account o Username for SSH authentication o Default: admin o Password: Password for SSH authentication o Port: Port for SSH connection. Default: 2222 Planar Simplicity M Series User Manual Page | 73 020-1429-00A...
Page 74
Edit the Media Player’s playlists and settings. Browser o Edit any saved bookmarks in the web browser. Android App o Select the app associated with the Android App source. o Default: Chromium Planar Simplicity M Series User Manual Page | 74 020-1429-00A...
Page 75
Operating the Display Network Application RS232 Network Port Planar Simplicity M Series User Manual Page | 75 020-1429-00A...
Page 76
Read all display settings from a USB storage device or an SD card, excluding the Signage Display Name field. This allows the display’s settings to copy from another unit. Planar Simplicity M Series User Manual Page | 76 020-1429-00A...
Page 77
Press to start copying media. When complete, a popup completion message will appear briefly. System Updates Initiates the firmware upgrade process. Refer to the directions in the firmware upgrade package for more information. Planar Simplicity M Series User Manual Page | 77 020-1429-00A...
Operating the Display Display Font Size Configures the font size used in the Android menu. Options: Small, Default, Large, Largest Default: Largest Planar Simplicity M Series User Manual Page | 79 020-1429-00A...
Allow the installation of third party Android apps. Settings: Disable, Enable Default: Disable Device Admin Apps Select an Android app to be a device administrator. Planar Simplicity M Series User Manual Page | 80 020-1429-00A...
Operating the Display System Keyboard & Inputs Configure keyboard settings. Developer Options Android debugging controls for engineering use only. Planar Simplicity M Series User Manual Page | 81 020-1429-00A...
Page 82
Operating the Display About Lists firmware version information. Planar Simplicity M Series User Manual Page | 82 020-1429-00A...
Lists pre-installed apps on the display. Select an app to run it. 19.4 Network Click Ok to navigate through to Ethernet menu. See the Ethernet menu under Settings on page 69. Planar Simplicity M Series User Manual Page | 83 020-1429-00A...
Operating the Display 19.5 Storage Allows management of the internal file system and any drives connected via USB. Planar Simplicity M Series User Manual Page | 84 020-1429-00A...
Include these three lines in the desc text file: Line 1: 1920 1080 30 Line 2: p 0 0 part0 Line 3: Where Line 3 is a new blank line. Planar Simplicity M Series User Manual Page | 85 020-1429-00A...
Page 86
3. Create a compressed file with the “part0” folder and “desc” text file: Select both files and used a program such as 7zip to compress. The compression level needs to be “Store” and the Archive needs to be named “bootanimation.zip” Planar Simplicity M Series User Manual Page | 86 020-1429-00A...
Page 87
4. Place the “bootanimation.zip” folder onto a USB stick and insert it into the display. 5. Go to the display’s Menu and change the Splash Screen setting to User. 6. Change Source to Android: Planar Simplicity M Series User Manual Page | 87 020-1429-00A...
Page 88
Operating the Display 7. Navigate to Settings: 8. Select Signage Display. 9. Select General Settings. Planar Simplicity M Series User Manual Page | 88 020-1429-00A...
Page 89
Operating the Display 10. Select Boot Logo. 11. Select Choose Boot Animation. 12. Select the USB symbol with the “bootanimation.zip” folder and click Save. 13. Test by rebooting the display. Planar Simplicity M Series User Manual Page | 89 020-1429-00A...
Operating the Display 21. Media Player The Planar Simplicity M Series display has an embedded Media Player that can be used to play videos, photos and/or music from a USB Drive. Please see below for more information. 21.1 Supported Media Formats The table below outline the supported media formats and compatibility for video, audio, and visual content.
Compose section on page 92. The content will play in the order selected during content creation, and with the features selected in the Settings menu. Planar Simplicity M Series User Manual Page | 91 020-1429-00A...
Page 92
Photos must be in the following folder: /planar/photo Videos must be in the following folder: /planar/video Audio files must be in the following folder: /planar/music Press the Options key on the remote to bring up the sidebar menu Planar Simplicity M Series User Manual...
Page 93
After saving the playlist, background music can be added. Note: This option is displayed after saving a playlist (see image below). o Back: Close the sidebar menu Planar Simplicity M Series User Manual Page | 93 020-1429-00A...
Page 94
Select the amount of time to show each image in the playlist o Options: 5 sec, 10 sec, 15 sec, 20 sec o Default: 5 sec Software Decode o Not supported. Planar Simplicity M Series User Manual Page | 94 020-1429-00A...
Page 95
Operating the Display Autoplay Planar Simplicity M Series User Manual Page | 95 020-1429-00A...
Operating the Display Browser Menu The Planar Simplicity M Series display has an embedded browser that can be used to schedule and deploy simple, web-based content. Please see below for more information. 22.1 Compose This menu offers seven input fields for URL configuration using manual entry and import and export list functions.
Page 97
See figure below for reference. Option This sidebar menu accesses import and export functions for the URL list. To access the menu, scroll past the last URL entry and click Option. Planar Simplicity M Series User Manual Page | 97 020-1429-00A...
Page 98
Press save and Ok to navigate back to the main menu. o Note: If you do not click Ok then changes made to the list will not save. Planar Simplicity M Series User Manual Page | 98 020-1429-00A...
Page 99
Once URL list options are saved, you can choose to Edit or Play a URL o Edit: Edit existing URL dialog o Play: Navigates to and opens the webpage stated by the URL Planar Simplicity M Series User Manual Page | 99 020-1429-00A...
This menu contains several browser options. Incognito o Select private browsing mode. o Settings: Disable, Enable o Default: Disable Auto Refresh o Setup automatic reloading of the web page on a periodic basis. Planar Simplicity M Series User Manual Page | 100 020-1429-00A...
Note: The Default Browser in the Boot on Source Menu is 0. If you do not assign a URL list number, the display will restart showing the Browser Settings Menu. The picture below is from OSD menu for reference. Planar Simplicity M Series User Manual Page | 101 020-1429-00A...
Operating the Display 23. Content Management System CMS Source opens HyperSign app. See Hypersign.com for more information. Planar Simplicity M Series User Manual Page | 102 020-1429-00A...
External Control In addition to using the Planar Simplicity M Series remote control and display, there are other methods of controlling the Planar Simplicity M Series display externally: Using a serial link to send commands and to receive responses to those commands.
56.250 297.000 x CEA-861-F Format 96, 4:2:0 sub-sampling 3840x2160 112.500 594.000 x CEA-861-F Format 96 3840x2160 67.500 297.000 x CEA-861-F Format 97, 4:2:0 sub-sampling 3840x2160 135.000 594.000 x CEA-861-F Format 97 Planar Simplicity M Series User Manual Page | 104 020-1429-00A...
Video Timing Input Supported Supported Supported Supported 4K @ HDMI 1-2 50/60Hz 4K @ USB-C 50/60Hz All Other Supported HDMI 1-2 Timings All Other Supported USB-C Timings All Other Supported Timings Planar Simplicity M Series User Manual Page | 105 020-1429-00A...
Backlight Max (Typ.)” value is instead calculated by increasing the default value of 90 to 100, and multiplying the wattage by approximately 1.1. The power consumption would increase if any other factor was introduced and should be taken into account when estimating power consumption. Planar Simplicity M Series User Manual Page | 106 020-1429-00A...
(1929.1mm x 961.7mm x 1100.0mm x 95.3mm) 95.3mm) SLM752-T: SLM862-T: 67.2" x 38.8" 76.8" x 44.2" x 3.9" x 3.9" (1706.2mm x (1951.8mm x 984.5mm x 1122.5mm x 98.2mm) 98.2mm) Planar Simplicity M Series User Manual Page | 107 020-1429-00A...
Page 108
260W x 3.42 BTU = 325 BTU = 342 BTU = 397 BTU = 445 BTU = 513 BTU = 889 BTU/hr BTU/hr BTU/hr BTU/hr BTU/hr BTU/hr Standby Power < 0.5W Consumption Planar Simplicity M Series User Manual Page | 108 020-1429-00A...
Page 109
8mm minimum Touch Interface USB-B, USB-C Supporting OS Windows 10, 11, 12, Linux, Mac OSX * Refer to Power Consumption section (page 106) for details on how this is calculated. Planar Simplicity M Series User Manual Page | 109 020-1429-00A...
Perform the adjustments according to "Operating the Display" on page 28. If the problem you are experiencing is not described below, or you cannot correct the problem, stop using the display and contact Planar’s Technical Support Department. See "Accessing the Planar Technical Support Website" on page 123. Issue Check for the following Make sure the correct source is selected.
Technical Support Website Go to http://www.planar.com/support/ to locate the following support documents and resources: User Guide RS232 User Manual Standard Warranties Planar support hotline number and email Simplicity M Series User Manual Page | 123 020-1429-00A...
Page 124
VESA Mounts, 15 Volume, 29, 37, 53, 54, 61 Image Compatibility, 91 Important Waste Disposal Information, 13 Input Menu, 46 Installing the Display, 26 Warranty Coverage, 12 IR commands, 32 LED Indicators, 30 Simplicity M Series User Manual Page | 124 020-1429-00A...
Need help?
Do you have a question about the Simplicity M Series and is the answer not in the manual?
Questions and answers