Vox Lil Looper Owner's Manual page 11

The recorded contents of a loop that is stopped will be
deleted if the pedal is pressed and held for 2 seconds
or more.
) p. 24 "Erasing a loop-recorded phrase"
2. EFFECT knob
This knob selects the effect type and sets the parameter.
After an effect type is set with the EFFECT button¸ you
can select the effect and set the first effect parameter
with this knob.
3. EFFECT button
This button selects the effect type.
The effect type will be indicated by the color of the
button when it lights up. If the button does not light
up, the effect is turned off.
Hint: When the optional VOX VFS2 foot switch is
connected to the EXT.SW jack, it can be used to turn
an effect on and off or select an effect type.
4. LOOP LEVEL/VALUE knob
This knob adjusts the loop playback volume. Also, it can set
the effect parameter, volume level when starting an AUTO
REC recording, metronome volume or time signature.
To adjust the loop volume, simply turn the knob.
To set the effect parameter and metronome, press and
hold the button that's assigned to each parameter and
turn the knob.
5. PEAK LED
This LED will light-up when the signal being input
from the INPUT jack is too loud. If this LED lights up,
adjust your guitar's volume until the LED no longer
light up.
6. AUTO REC button
This button turns the Auto Recording Start function on.
) p. 20 "Initiating recording when you start playing
(Auto Recording Start)"
7. METRONOME button
This button turns the metronome sound on/off. When
you press the button, it will light-up, and you'll hear
the metronome.
To adjust the metronome volume, hold down this
button and turn the LOOP LEVEL/VALUE knob.
8. TAP button
This button sets the metronome tempo. You can set the
Panels
11