IBM T220 User Manual page 15

DANGER
Electric current from the power cords, telephone lines and communication cables
is hazardous. To avoid shock hazard, connect and disconnect cables as shown
below when installing, moving, or opening the covers of this product or attached
devices. The power cord must be used with a properly grounded outlet. Connect
the power plugs to mains outlets located in the same panel.
To Connect
Turn everything OFF.
Attach all cables to devices.
Attach the signal cables to receptacles.
Attach the power cord to an outlet.
Turn the device ON.
1
In the U.K., by law, the telephone
line cable must be connected after
the power cord.
Turn everything OFF.
First remove the power cord from
1
the outlet.
Remove signal cables from
receptacles.
Remove all cables from devices.
2
In the U.K., by law, the telephone
line cable must be disconnected after
the telephone line cable.
To Disconnect
2
XIII