Figure 4 Coax; A Ssembly - Garmin Apollo SL40 Installation Manual

Step 1.
Braid Clamp
Step 2.
Step 3.
Solder Center
Conductor
Assembly instructions for right angle connector part #162-1008
Figure 4 Coax Connector Assembly
Apollo SL40 Installation Manual
Clamp Nut
Slit 1/4" (2X)
0.125
0.031
0.375
Cap
- Slide clamp nut over coax.
- Strip coax as illustrated.
- Cut two 1/4" slits in jacket 180
degrees apart.
- Slide braid clamp over end of coax and
under the braid.
- Insert coax with braid clamp into
connector and tighten clamp nut securely.
- Solder the center conductor of the coax
to the contact as illustrated.
- Attach the cap and secure tightly.
Installation
9