Chapter 3 Powering Up The Unit; Figure 3.1:Hdd Checking In Progress; Figure 3.2:Real Time Display Mode; On-Screen Display - Advantech 530 User Manual

Chapter 3 Powering Up the Unit

3.1 On-Screen Display

After the unit is properly installed it is ready to record and play. Apply
power and switch on.
Note:
After the unit is powered on, the unit checks the HDD for several sec-
onds, then displays the following screen.
The unit will enter into real-time display mode as shown above.
DVR-530 User's Manual
Make sure the HDD is powered off before remov-
ing the drive
Figure 3.1: HDD Checking in progress
Figure 3.2: Real Time Display Mode
14