Table of Contents
Advertisement
4.8 Backup Through USB Port
The unit provides one USB port for simple backup over a connection with
a PC. Please use the following steps to successfully link:
1.
Connect the USB cable between the unit and PC.
2.
Select "LINK TO PC" under the submenu of the unit. The "link-
ing" will take around 30 seconds. The connection is then ready for
PC backup as "Linked" is indicated on the screen.
3.
Open the PC viewer on the PC after the PC identifies the unknown
hardware device.
4.
Press the "Menu" button to go back to the "Main Menu."
Note:
1. The unit employs USB 2.0, so it will take
around 5 min to handshake with USB 1.0.
2. Before performing a backup over USB, please
install the PC Viewer software on your PC.
25
Chapter 4
Advertisement
Table of Contents
