Ken A Vision Video Flex 7200HD Instruction Manual
Video flex 7000 series
Hide thumbs
Also See for Video Flex 7200HD:
- Instruction manual (12 pages) ,
- Specification (2 pages) ,
- Overview (2 pages)
Subscribe to Our Youtube Channel
Related Manuals for Ken A Vision Video Flex 7200HD
Summary of Contents for Ken A Vision Video Flex 7200HD
- Page 1 Video Flex 7000 Series Instruction Manual 7100 Model: 7200HD 7100P 7200HD 7300 7300P 7600 7600P...
-
Page 3: Table Of Contents
Table of Contents Introduction ..................4 Package Contents ................4 Setting up your Video Flex ..............4 Connecting to an output device ............4 Capture and store images ............5 Picture quality adjustment ............5 Video Flex lenses ...............5 Focusing ..................6 Optional polarizing adapter ............6 Connecting the microscope adapter ..........6 Lighting ...................7 Specifications ...................8 Accessories ..................8... -
Page 4: Introduction
Images captured by your camera will be transmitted directly to computer and through your computer to a Projector, DVR, Flash Drive or other digital device. The 7200HD is a high definition dig- ital device designed to connect via a single USB cable. -
Page 5: Capture And Store Images
2. Capture and store images: Images may be recorded to a computer, DVR, Flash Drive, CD or similar digi- tal unit using Applied Vision Software. Applied Vision allows you to capture still images, a sequence of time lapse images, a time lapse movie, or a full motion movie. -
Page 6: Focusing
• Changing the camera lens: A standard 8mm lens is assembled on each camera. To change the lens, simply extend the lens by rotating in a counter-clockwise rotation until fully extended. Apply a small amount of additional force in this same direction to free the lens. -
Page 7: Lighting
NOTE: Before installing the microscope eyepiece adapter, measure the size of the outside diameter of the microscope eyepiece to be sure the adapter will fit over the end of the eyepiece. Remove the rubber eyecup if present. 1. Place the microscope eyepiece adapter over one of the microscope's eyepieces. -
Page 8: Specifications
® Video Flex Specifications Base Triangular Poly-carbonate Neck Length 25" (63.5 cm) Head Ball & Socket Lens 8mm C-Mount 1/4 Quick FocusTM Magnification Approximately 50:1 at 1 (2.5cm) from object Focal Distance 1/4" to infinity Resolution 2592 x 1944 (5.0 megapixels) Eyepiece Adapters 28mm &... -
Page 9: About Ken-A-Vision
About Ken-A-Vision Ken-A-Vision has over 65 years of history providing quality products to institutions world wide. We stand behind our workmanship and offer an unbeatable warranty. We offer products for education, lesson plan ideas, technical support and certified microscope repair. If you have questions about how our repair facility could serve your repair needs, please contact Ken-A-Vision at (816) 353-4787 or e-mail us at info@ken-a-vision.com. -
Page 10: Compliance
Camera complies with Class A and B, part 15 of the FCC Rules. Use only Ken-A-Vision Video Flex parts. Failure to use non-Video Flex parts will void your warranty. INFORMATION TO THE USER Changes or modifications not expressly approved by the party responsible for compliance could void the user's author- ity to operate the equipment. - Page 12 5615 Raytown Road • Kansas City, MO 64133 U.S.A. Tel.: 816-353-4787 • Fax: 816-358-5072 email:info@ken-a-vision.com • www.ken-a-vision.com INS-VF7...
Need help?
Do you have a question about the Video Flex 7200HD and is the answer not in the manual?
Questions and answers