Ken A Vision 7100 Instruction Manual

Ken-A-Vision has over 50 years of history providing
quality products to institutions world wide. We stand
behind our workmanship and offer an unbeatable
warranty. We offer products for education, lesson plan
ideas, technical support and certified microscope repair.
If you have questions about how our repair facility
could serve your repair needs, please contact
Ken-A-Vision at (816) 353-4787 or
e-mail us at info@ken-a-vision.com.
WARRANTY
To activate the five (5) year limited warranty on your new Video Flex
warranty at www.ken-a-vision.com/warranty.htm. Returns and repairs may be handled through
your local dealer or directly with Ken-A-Vision. The warranty will not apply if your serial
number has been removed or if the product has been tampered with, disassembled or damaged
by misuse, accident, modification or unauthorized repair. To contact Ken-A-Vision please call
1-816-353-4787, or your local dealer.
To learn more about our company's products and services please visit our
web-site: www.ken-a-vision.com.
Camera complies with Class A and B, part 15 of the FCC Rules.
Use only Ken-A-Vision Video Flex parts. The Power Supply and Charger are made exclu-
sively for the Video Flex. Failure to use non-Video Flex parts will void your warranty.
INFORMATION TO THE USER
approved by the party responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy, and if not installed and used in
accordance with instructions, may cause harmful interference to radio communication.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio reception which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures: Reorient or relocate the receiving antenna and/or
increase the separation distance between the equipment and the receiver, and/or connect
equipment into an outlet on a circuit different from that which the receiver is connected; and/or
consult your dealer or experienced radio/ TV technician for help.
5615 Raytown Road Kansas City, MO 64133
www.ken-a-vision.com
Tel. 816-353-4787 Fax. 816-358-5072
, simply fill out the
®
Changes or modifications not expressly
11
Instruction Manual
Knowledge Through Vision
INS-VF7.904v1
by
7000 Series