Garmin PN 906-2001-00 Basic Operation Manual page 4

1. Autopilot must be in Heading Hold or Standby Mode before selection process can start.
(AUTO LED solid on or STBY LED solid on. No other LED's on.)
2. Press and hold the Setup Button. Two LED's next to number 1 through 6 will illuminate, indicating
which special functions are programmed to operate.
3. Make selection of the Special Function you want to use by pressing and releasing the Special Function
buttons until the appropriate LED's are lit. (See Table below for Special Function Indicators.)
4. Release the Setup Button
5. To make the selected Special Functions into startup defaults (Save The Setting): Press and
release the setup button, (LED will light) next press and hold the Select Load Button, then press and
release the DeckMount Button quickly, last release the Select Load Button. (You can change this default
by repeating this process.)
Number 7, 8 and 9 are GPS features and only work when coupled with GPS
Man Over Board
Idle/Resume
Zig-Zag patterns
Step Turns to Port
Circle Turns to Port
Remote Turn to Port
Turn back light on
or off
1 MOB
2 Idle/Resume
3 Zig-Zag (other)
Feature Operations (Pattern Steering)
How to Select Feature Operations
(See your owner's manual)
Press and hold to change feature options.
Special Function Indicator LED Numbers
4 Steps
5 Circles
6 Remote Steer
4
GPS
Reverse
Step Turns to Starboard
Circle Turns to Starboard
Remote Turn to Starboard
LED's Bright or
Dim
7 Orbit Wpt.
8 Three Leaf Clover
9 Search