Strong SRT 5500 User Manual page 26

Date/Name/Size)
[LEFT]/[RIGHT]
8. Press
(All/Recording/
Media).
-The screen "All" displays all the programs in Recording & Media List.
-The screen "Recording" displays all the programs that have been recorded.
(includes USB device and internal HDD recordings).
-The "Media" displays all the media programs on any connected USB device and
Internal HDD.
Press [PLAY] to play the file in full screen.
9.
Press [INFO] to check the status of
playback
Press [LEFT] button to fast forward to
desired point in recorded program.
Press [RIGHT] button to go back to
desired point in recorded program
Press [UP]/[DOWN] button to skip to
the next or
program
Press [PAUSE] button to pause
playback
Press [FF] to cycle between 2X, 4X, 8X, 16X, 32X, 64X fast forward speeds,
press [PLAY] to resume playback
Press [REW] to cycle between 2X, 4X, 8X, 16X, 32X, 64X fast rewind
speeds, press [PLAY] to resume playback
Press [STOP]/[EXIT] to stop playback. If a program is being recorded while
you are playing back a previously recorded program, when you press the
[STOP]/[EXIT], a dialog will be displayed on screen to allow you to select
to either stop playback or stop the recording.
Editing recorded programs
In this mode you can remove sections of the recorded program, so when
playing back, these sections will be skipped and playback will continue after the
removed section.
Open DVR Menu by pressing [DVR] in Live TV Mode.
1.
Select the recorded program you wish to edit using the UP and Down Arrow
2.
keys Begin playback of the selected program by pressing the OK button twice.
Once playback has begun press the INFO button. This will display a playback
3.
progress banner and a number of options using the coloured buttons
Red Button-Mark A : Press the Red button during playback to set the start
position of the section to be removed. An "A" will be placed on the progress
banner.
Green Button-Mark B : Press the Green button to set the end position of
button to switch between
previous recorded
24
difference screens.