Strong SRT 5500 User Manual page 11

Connecting to Equipment
Connect the unit via YpbPr output and Audio output
(for high definition viewing)
1. Connect the antenna with ANT IN of the unit.
2. Connect the RF loop cable via LOOP IN and LOOP OUT.
3. Connect the unit to TV via YPbPr cable as below.
Connect the unit via HDMI output
(for high definition viewing)
1. Connect the antenna with ANT IN of the unit.
2. Connect the RF loop cable via LOOP IN and LOOP OUT.
3.
Connect the unit to TV via HDMI cable as below.
9