Compliance With International Standarts - Obreey IQ 701 User Manual

Compliance with international standarts

The EUT should only be connected by adapter to a complied Limited Power
Source. The adapter supplier/model and power supply specification:
AC Power:
Manufacturer: Huntkey
Model: HKA01812015-2D/3D
Rated output voltage: DC 12V 1.5A)
This equipment is marked with the 0984 symbol and can be used throughout the
European community.
This indicates compliance with the R&TTE Directive 1999/5/EC and meets the relevant
parts of the following technical specifications:

EN 300 328 V1.7.1 – Electromagnetic compatibility and Radio spectrum Matters (ERM);
Wideband Transmission Systems; Data transport equipment operating in the 2.4 GHz
ISM band and using wide band modulation techniques; Harmonized EN covering
essential requirements under article 3.2 of the R&TTE Directive

EN 301 489‐1 V1.8.1 ‐ Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1:
Common technical requirements

ETSI EN 301 489‐7 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters
(ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital
cellular radio telecommunications systems (GSM and DCS)

EN 301 489‐17 V2.1.1 ‐ Electromagnetic compatibility and Radio spectrum Matters
(ERM); EMC standard for radio equipment and services; Part 17: Specific conditions for
2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment

ETSI EN 301 489‐24 V1.4.1‐ Electromagnetic compatibility and Radio spectrum Matters
(ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 24: Specific conditions for IMT‐2000 CDMA Direct Spread (UTRA) for Mobile and
portable (UE) radio and ancillary equipment