Compliance With International Standards - Obreey IQ 701 User Manual

User Manual PocketBook IQ 701

COMPLIANCE WITH INTERNATIONAL STANDARDS

1. The EUT should only be connected by adapter to a complied Limited Power Source. The adapter
supplier/model and power supply specification:
AC Power:
Manufacturer: Huntkey
Model: HKA01812015-2D/3D
Rated output voltage: DC 12V 1.5A)
This equipment is marked with the 0984 symbol and can be used throughout the European
community.
This indicates compliance with the R&TTE Directive 1999/5/EC and meets the relevant parts of
the following technical specifications:
•
EN 300 328 – Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband
Transmission Systems; Data transmission equipment operating in the 2.4GHz ISM band
and using spread spectrum modulation techniques; Harmonized EN covering essential
requirements under article 3.2 of the R&TTE directive.
•
EN 301 489-17 - Electromagnetic Compatibility and Radio Spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 17
Specific Conditions for Wideband Data and HIPERLAN Equipment.
•
EN 60950 - Safety of Information Technology Equipment.
•
EN 62311: 2008– Assessment of electronic and electrical equipment related to human
exposure restrictions for electromagnetic fields (0 Hz - 300 GHz). Marking with this symbol
indicates that usage restrictions apply.
France - 2.4GHz for Metropolitan France:
In all Metropolitan departments, wireless LAN frequencies can be used under the following
conditions, either for public or private use:
•
Indoor use: maximum power (EIRP*) of 100 mW for the entire 2400-2483.5 MHz frequency
band
•
Outdoor use: maximum power (EIRP*) of 100 mW for the 2400-2454 MHz band and with
maximum power (EIRP*) of 10 mW for the 2454-2483 MHz band.
Important: Changes or modifications to this product not authorized could void the EMC and wireless
compliance and negate your authority to operate the product. This product has demonstrated EMC
compliance under conditions that included the use of compliant peripheral devices and shielded cables
between system components. It is important that you use compliant peripheral devices and shielded cables
between system components to reduce the possibility of causing interference to radios, televisions, and
other electronic devices.
39