LG DLE3733S Owner's Manual page 22

If your local codes or ordinances permit the
connection of a frame-grounding conductor to the
neutral wire, use these instructions. If your local
codes or ordinances do not allow the connection of
a frame-grounding conductor to the neutral wire,
use the instructions under Section 1: Optional 3-
wire connection.
3-wire receptacle
EMAtype 10-30R)
-_e plug__ Spade tsgm indasl s with
Neutral prong
u3-Wire plug _ 3/4 in. (1.9 cm)
pproved strain relief
rona" Ring terminals
_ _Neutral (white or center wire
|
|
Center terminal
block screw (silver)
Neutral grounding
wire (white)
Neutral grounding
wire (white)
Strain relief
External ground
connector
22
• If your local codes or ordinances do not allow the
connection of a frame-grounding conductor to the
neutral wire, use the instructions under this
section.
I///
Neutral grounding
wire (Green)
Neutral wire (white)
External ground
connector
--Separate ground
lre
[
.
2.
.
4.
.
Connect neutral wire (white) of power cord to
center terminal block screw.
Connect ground wire of appliance and neutral
wire of power cord to center terminal block
screw.
Connect red and black wires to the left and right
terminal block screws.
Make sure the strain relief screw is tightened.
Be sure that all terminal block nuts are on tight
and power cord is in right position.
Connect a independent ground wire from external
ground connector to proper ground.