Using The Voice Message Center - First Alert FA168CPS User Manual

Phone Access
• If included, a Phone Module permits you to access the system via a touch-tone
phone, either on-premises or by calling-in when away.
• You can receive synthesized voice messages over the telephone regarding the
status of the security system.
• You can arm and disarm the system and perform most function commands
remotely via the telephone, with voice confirmation provided after each command.
• Refer to the Phone Access User's Guide supplied with the Phone Module for
information regarding the use of this feature.
Paging Feature
• If programmed, the system can automatically send certain system condition
messages to up to four (FA168CPS) or two (FA148CP) pagers.
• The system can also automatically alert a pager if the system has not been
disarmed by a certain time (e.g., can let you know a child has not arrived home).
• You can also manually send a message to designated pagers.
Using the Voice Message Center (if Voice Keypad is installed) Using the Voice Message Center (if Voice Keypad is installed)
Using the Voice Message Center (if Voice Keypad is installed) Using the Voice Message Center (if Voice Keypad is installed)
The Voice Keypads feature a voice message center
that lets you record and playback one message.
• The message can be up to 2.5-minutes long
• The message remains in the keypad's memory
until a new message is recorded.
• The volume control of the message is adjustable.
• Refer to the procedures below when using the
Message Center functions.
Message Center Functions
To...
record a
message
end
recording
play a
message
adjust the
volume
System Overview System Overview
System Overview System Overview
Press these keys...
[#] FUNCTION + [0] VOICE + [1] RECORD
[1] RECORD
[#] FUNCTION + [0] VOICE + [3] PLAY
[#] FUNCTION + [0] VOICE + [2] VOLUME keys,
then press volume key [3] ↑ (up) or [6] ↓ (down)
(Continued) (Continued)
(Continued) (Continued)
LEDS
ARMED READY MESSAGE
SPEAKER
RECORD
KEY
A 1 2 3
RECORD VOLUME PLAY
B 4
5 6
FUNCTION
KEYS
C 7 8 9
D * 0 #
STATUS VOICE FUNCTION
FA560
STATUS MICROPHONE VOICE
KEY KEY
Notes...
The red MESSAGE LED lights.
Message remains in memory
until a new message is recorded.
The red MESSAGE LED flashes,
indicating message waiting.
The recorded message plays and
the red MESSAGE LED turns off.
Adjusting message volume also
adjusts status volume. Volume
cannot be adjusted while playing.
LCD
DISPLAY
VOLUME
KEY
PLAY KEY
AND
UP VOLUME
DOWN
VOLUME
FUNCTION
KEY
FA560VKP-004-V0
– 7 –