Using The Voice Message Center; Paging Feature; Function Keys; Scheduling - First Alert FA130CP User Manual

Paging Feature

• If programmed, the system can automatically send certain system condition
messages to a pager.
• The display consists of code numbers that indicate the type of condition that has
occurred.

Function Keys

• The "A", "B", "C", and "D" keys on the keypad can be programmed to perform
various functions.
• Functions include: activate a Panic alarm; arm the system; provide step arming;
switch lights on/off; send a message to a pager; display Time/Date; start a Macro

Scheduling

• Your system can be programmed to automatically perform certain functions (e.g.,
arm the system) at a predetermined time each day.
The Voice Keypads feature a voice message center
that lets you record and playback one message.
• The message can be up to 2.5-minutes long
• The message remains in the keypad's memory
until a new message is recorded.
• The volume control of the message is adjustable.
• Refer to the procedures below when using the
Message Center functions.
Message Center Functions
To... Press these keys...
record a
[#] FUNCTION + [0] VOICE + [1] RECORD
message
end
[1] RECORD
recording
play a
[#] FUNCTION + [0] VOICE + [3] PLAY
message
adjust the
[#] FUNCTION + [0] VOICE + [2] VOLUME keys,
volume
then press volume key [3] ↑ (up) or [6] ↓ (down)
LEDS
ARMED READY MESSAGE
SPEAKER
RECORD
KEY
A 1 2 3
RECORD VOLUME PLAY
B 4 5 6
FUNCTION
KEYS
C 7 8 9
0 #
D *
STATUS VOICE FUNCTION
FA560
STATUS MICROPHONE VOICE
KEY KEY
Notes...
The red MESSAGE LED lights.
Message remains in memory
until a new message is recorded.
The red MESSAGE LED flashes,
indicating message waiting.
The recorded message plays and
the red MESSAGE LED turns off.
Adjusting message volume also
adjusts status volume. Volume
cannot be adjusted while playing.
LCD
DISPLAY
VOLUME
KEY
PLAY KEY
AND
UP VOLUME
DOWN
VOLUME
FUNCTION
KEY
FA560VKP-004-V0
– 7 –