Entone Hydra II Setup Manual

Configuring the tivo for use with entone’s hydra ii

Hide thumbs Also See for Hydra II:

Table of Contents

Download this manual See also: User Manual, Quick Reference Manual

Configuring the Tivo for Use

With Entone's Hydra II

Setup Guide

Table of Contents

Need help?

Do you have a question about the Hydra II and is the answer not in the manual?

Page 1 Configuring the Tivo for Use With Entone’s Hydra II Setup Guide...
Page 2 The material in this document is for information only and is subject to change without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, Entone, Inc. assumes no liability resulting from the use of the information contained herein.
Page 3 Entone HydraII Advanced Setting for Channel Changing with TiVo IR Control Step 1 Go to the Channel Changing screen. From TiVo Central; select Messages & Setting > Setting > Channels > Channel Changing. Step 2 Select No, I’ve switched to a different cable box.
Page 4 Step 6 Select NO (typical) for “Enter” Button. Step 7 On your TiVo remote, press the following keys in order: THUMBS UP > THUMBS DOWN > PAUSE > PLAY * You should hear 5 rings when enter the key sequence above. If you do not hear the rings, enter the code again.
Page 5 Step 10 Enter 10021 for IR Code, then press SELECT. Step 11 On the next screen, select 10021-B. Step 12 Once you have selected a code, select Use these settings. You should now be able to change channels using IR control.