Summary of Contents for American Dryer Corp. ADE-50S
Page 1
SUPER AD-50 Parts Manual 1994 thru 2001 Telephone: (508) 678-9000 / Fax: (508) 678-9447 24 VAC MODELS: ADG-50DS ADE-50S ADS-50S American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 E-mail: techsupport@amdry.com www.amdry.com ADC Part No. 450302...
Page 2
Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.
Control Door Assembly Without Trim For Non-Coin Models Mfd. as of July 13, 1998 ... 3 High Security Control Door Assembly For All Coin Models and Non-Coin Models Mfd. prior to July 13, 1998 ... 4 Phase 5 Coin Microprocessor Control Panel Assembly ... 5 Phase 5 Non-Coin Microprocessor Control Panel Assembly ...
Page 4
Tumbler/Support Assemblies ... 24 Idler Bearing Assembly ... 25 Tumbler Bearing Assembly ... 26, 27 Non-Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly ... 28, 29 Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly ... 30, 31 Sensor Bracket Assemblies ... 32, 33 Direct Spark Ignition Burner Assembly ...
Control Door Assembly Without Trim For Non-Coin Models Mfd. as of July 13, 1998 Illus. No. Part No. Qty. Description 881053 ADC Logo Only (with double adhesive tape) 870011 Logo Double Tape Kit 882265* Control Door (includes illus. nos. 2 and 3) 117604 Neoprene Sponge Tape (sold by the foot) 150300...
For ALL Coin Models and Non-Coin Models Mfd. prior to July 13, 1998 Illus. No. Part No. Qty. Description 160015 High Security MK-100 Lock Assembly with Key (for coin models Only) 160104 MK-100 Key Only 160017 Special Dummy Lock Only (for non-coin models Only) 160032 Lock Cam Only 881053...
Phase 5 Coin and Non-Coin Microprocessor Control Box Assembly Illus. No. Part No. Qty. Description 141403 24 VAC Transformer For ALL Gas and Steam Models, and Electric Models of 380/416/480 Volt 132070 24 VAC Transformer (for electric models of 208 volt/240 volt) 150300 #10 x 1/2”...
Illus. No. Part No. Qty. Description 122603 9-Pin Socket Connector 122701 Socket Terminal Only 122801 Pin/Socket Extraction Tool 315010 9-Pin Connector Bracket 150300 #10 x 1/2” Hex Washer TEK Screw 150300 #10 x 1/2” Hex Washer TEK Screw 141403 24 VAC Transformer (for ALL gas and steam models, and electric models of 380/416/480 volt) 132070 24 VAC Transformer...
Non-Microprocessor Coin Meter Control Panel Assembly Illus. No. Part No. Qty. Description 123005 Red Indicator Light - 24 VAC 122400 Rocker Heat Selector Switch 824020 Coin Meter Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 6 and 8 through 12) 800054 Coin Meter Control Panel Only 131917...
Non-Microprocessor Coin Meter Control Box Assembly Illus. No. Part No. Qty. Description 122603 9-Pin Socket Connector 122701 Socket Terminal Only 122801 Pin/Socket Extraction Tool 315010 9-Pin Connector Bracket 150300 #10 x 1/2” Hex Washer TEK Screw 150300 #10 x 1/2” Hex Washer TEK Screw 141403 24 VAC Transformer (for ALL gas and steam models, and electric models of 380/416/480 volt)
“Plastic” Main Door Assembly Illus. No. Part No. Qty. Description 881421 Gray Plastic Main Door Assembly Complete with Mechanical Fasteners (includes illus. nos. 1 and 5 through 9) 800448 12-1/2” Stainless Steel Main Door Hinge Assembly 150410 #10-24 x 3/8” Phillips Pan Head Taptite Screw 152014 1/4-20 Free Spin Wash Nut 102349...
Front Panel Assembly For “Plastic” Door Illus. No. Part No. Qty. Description 875301* Insulated Front Panel Assembly Complete - Latch Type (includes illus. nos. 1 through 3 and 5) 875312 Stainless Steel Right Hand Insulated Front Panel Assembly Complete - Latch Type (includes illus.
Illus. No. Part No. Qty. Description 881150 Black Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) 102354 Door Gasket 170730 Clear Glass Adhesive (10.3 oz. cartridge) 170731 Black Glass Adhesive (10.3 oz. cartridge) 881152 Black Top Hinge Block Assembly (includes illus.
Main Door Switch Assembly Cold Rolled Steel Door Illus. No. Part No. Qty. Description 153566 #6-32 x 7/8” Clinch Stud 152013 #6-32 Hex Nut 1/4” ATF Zinc Plated 153010 #6 Star Washer 137005 Single-Pole Door Switch 122636 Flag Terminal 881211 Main Door Switch Housing 150301 #8-18 x 7/16”...
Illus. No. Part No. Qty. Description 881270* Right Hand Front Panel Assembly (cold rolled steel door) (includes illus. nos. 1 through 3) 881288 Stainless Steel Front Panel Assembly (cold rolled steel door) (includes illus. nos. 1 through 3) 881996* Left Hand Front Panel Assembly (cold rolled steel door) (includes illus.
Lint Trap Assembly Illus. No. Part No. Qty. Description 881064 Lint Trap Assembly Complete (includes illus. nos. 1 and 3 through 5) 881063 Lint Trap Only 154200 5/32” Pop Rivet 150300 #10 x 1/2” Hex Washer TEK Screw 304100 Lint Screen Hold Down 800506 Lint Screen Only 150419...
Drop Lint Door Assembly With Trim For ALL Coin Models and Non-Coin Models Mfd. prior to July 13, 1998 Illus. No. Part No. Qty. Description 160001 AD-100 Lock Assembly with Key 160103 AD-100 Key Only 800150 Knob Latch Kit Assembly (for non-coin models) (includes illus.
Illus. No. Part No. Qty. Description 800838 Tumbler Only with Tapered Rib (without felt collar) 800837** Non-Reversing Tumbler and Support Assembly with Tapered Rib (includes illus. nos. 1 through 10) 800839** Reversing Tumbler and Support Assembly with Tapered Rib (includes illus. nos. 1 through 10) 150309 #10-16 x 1/2”...
Non-Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Illus. No. Part No. Qty. Description 100166 4L-790 V-Belt (to idler assembly) 50/60 Hz Only 100701 3/16” x 3/16” x 1” Key 101130 5/8” x 2-1/2” Motor Pulley (60 Hz motors Only) 101139 5/8”...
Page 31
Non-Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Illus. No. Part No. Qty. Description 153002 5/16” Lock Washer 153001 5/16” Flat Washer 117600 Noise Suppressor Tape (sold by the foot) 154000 5/16-18 Tinnerman Nut 800919 1 hp Motor Mount Only (56Z frame) (includes illus.
Illus. No. Part No. Qty. Description 154004 Twin Speed Nut 150309 #10-16 x 1/2” Hex Head TEK Crimptite Screw 802799 Sail Switch Box Cover and Bracket Only 150303 #4 x 3/4” Pan Head “A” Machine Screw 122200 Sail Switch Only 105500 Sail Switch Actuator Rod 319202...
Outer Top/Back Guard Assemblies Illus. No. Part No. Qty. Description 322809 Back Electrical Box Cover 150301 #8-18 x 7/16” Phillips Pan Head TEK Screw 314421 Top Back Guard (gas models Only) (for models mfd. as of April 20, 1998) 314422 Top Back Guard (electric models Only) (for models mfd.
Microprocessor Coin Acceptors Listing NOTE: Coin acceptors listed include optical switch (ADC Part No. 137056 Greenwald). Coin acceptors listed include optical switch (ADC Part No. 881143 Hanke). ADC Part No. Nation 882689 United States 125100 U.S. and Canada 125107 Australia 881768 Australia 881604...
Need help?
Do you have a question about the ADE-50S and is the answer not in the manual?
Questions and answers