Wireless Remote Control Fl Ash Photography; Digital Zoom (Digital Tele-Converter) - Olympus E-PL6 Instruction Manual

2 Shoot.
• Frames are shot even if the image is not in focus after AF. If you wish to fi x the focus
position, shoot in MF.
• [Rec View] operates for 0.5 seconds.
• If either of the time before shooting, or shooting interval is set to 1 minute 30 seconds
or longer, the monitor and camera power will turn off after 1 minute. 10 seconds before
shooting, the power will automatically turn on again. When the monitor is off, press the
ON/OFF button to turn it on again.
#
Cautions
• This function cannot be used if the time and date have not been set.
• If the AF mode is set to [C-AF] or [C-AF+TR], it is automatically changed to [S-AF].
3
• Touch operations are disabled during time lapse shooting.
• Bracketing and multiple exposure cannot be used together.
• The fl ash will not work if the fl ash charging time is longer than the interval between shots.
• For [BULB] and [TIME] shooting, the shutter speed is fi xed to 60 seconds.
• If the camera automatically turns off in interval between shots, it will turn on in time for the
next shot.
• If the any of the still pictures are not recorded correctly, the time lapse movie will not be
generated.
• If there is insuffi cient space on the card, the time lapse movie will not be recorded.
• Time lapse shooting will cancelled if any of the following is operated: Mode dial, MENU
button, q button, lens release button, or connecting the USB cable.
• If you press the ON/OFF button during the time before shooting while the monitor is on,
time lapse shooting will be cancelled and the camera power will turn off.
• If there is not enough charge left on the battery, the shooting may end partway through.
Make sure the battery is suitably charged before starting.
Wireless remote control fl ash photography
The supplied fl ash unit and external fl ash units that offer a remote control mode and
are designated for use with this camera can be used for wireless fl ash photography.
g "Wireless remote control fl ash photography" (P. 113)

Digital Zoom (Digital Tele-converter)

Digital Tele-converter is used to zoom in beyond the current zoom ratio. The camera
saves the center crop. Zoom is increased by about 2×.
Select [On] for [Digital Tele-converter] in W Shooting Menu 1.
1
2
The view in the monitor will be enlarged by a factor of two.
• The subject will be recorded as it appears in the monitor.
#
Cautions
• Digital zoom is not available with multiple exposures or when T, s, f, w, or m is
selected in SCN mode.
• This function is not available when [Movie Effect] is [On] in n mode.
• When a RAW image is displayed, the area visible in the monitor is indicated by a frame.
66 EN