Attaching A Lens To The Camera; Lens Attachment Mark; Lens Release Button - Olympus E-PL6 Instruction Manual

Attaching a lens to the camera

1
Attach a lens to the camera.
2
1
Rear cap
• Align the lens attachment mark (red) on the camera with the alignment mark (red) on
the lens, then insert the lens into the camera's body.
• Rotate the lens in the direction indicated by the arrow until you hear it clicks.
#
Cautions
• Make sure the camera is turned off.
• Do not press the lens release button.
• Do not touch internal portions of the camera.
2
Remove the lens cap.
Using lenses with an UNLOCK switch
Retractable lenses with an UNLOCK switch cannot
be used while retracted. Turn the zoom ring in the
direction of arrow ( 1 ) to extend the lens ( 2 ).
To store, turn the zoom ring in the direction of arrow
( 4 ) while sliding the UNLOCK switch ( 3 ).
Removing the lens from the camera
While pressing the lens release button, rotate the
lens in the direction of the arrow.
Interchangeable lenses
Read "Interchangeable lenses" (P. 107).
1
2
1
2
1
4
3
2

Lens release button

2
1
1
1
EN 13