Usingthe oven controls.
Throughout this manual, features and appearance may vary from your model.
OVEN
[
O
1
TIME
CONTROLS
OvenControl,Clockand TimerFeaturesand Settings
BAKEPad
0
Press this pad to select the bake flmction.
BROIL HI/LO Pad
Press this pad to select d_e broil function.
O
isplay
Shows the time of dax and the time set fin.
the time_:
If "F--and
a number or letter" flash in the display
and the oven control signals, this indicates a
function error code. Pressthe CLEAR/OFF p ad Allow the
oven to cool for one hour.Put the ovenback into operation.
If the function errorcode repeats,disconnectthe power to
the ovenand ca//for sen/ice.
If a flashing time of day is in the display, you have
experienced a power failure. Reset the clock.
If your oven was set for a timed oven operation when
the power outage occurred, the clock andall
programmedfunctions must be reset
The time of day will flash in the display when the
oven is first turned on.
O
COOKING TIME Pad
Press this pad and then press the
INCREASE
or DECREASE pads to set the amount
ot
time
vou want your ti)od to cook. The oven
will shut off when the cooking
time has
I'tln
()ILL
0
@
O
DELAYSTARTPad
Press this pad and the INCREASE or
DECREASE pads to delay the starting
of
your oven up to 9 houi_ and 59 minutes.
CLOCKPad
Press this pad before
setting
the clock.
KITCHEN TIMER ON/OFFPad
Press this pad to select the timer feature.
STARTPad
1_/] tlSt be pressed
to start any cooking
or
cleaning
flmction.
DECREASEPad
Short taps to this pad will decrease
the
time or temperature
by small amounts.
Press and hold the pad to decrease
the
time or temperature
by linger amounts.
INCREASE Pad
Short taps to this pad will increase
the time
or temperature
by small amounts.
Press
and hold the pad to increase
the time or
temperature
by larger amounts.
CLEAR/OFFPad
Press this pad to cancel ALL o',en
operations
except the clock and time_:
SELFCLEAN Pad
Press this pad to select the self:cleaning
flmction.
See the Using the self-cleaning
oven section.
10
Need help?
Do you have a question about the JGSP22 and is the answer not in the manual?