GE 24"BUILT-INOVEN Installation Instructions page 4

To remove the oven door:
1. Open the door to the stop position (see Fig. 3A).
2. Grasp the door at each side and lift up and off the
hinges (see Fig. 3B).
1. Hold the door over the hinges with the slots at
the bottom edge of the door lined up with the
hinges.
2. Slide the door down onto the hinges as far as
it will go and close the door.
/
/
/
i
3. Putthe oven into the cabinet and use a 1/8"drill
bit to drift holes in the cabinet front through the
holes in the oven trim.
4. Secure the oven in the cabinet with the screws
provided.
5. Thelowertrimshouldbemountedtothebottom
of the oven frame with the 3 screws provided.
The lower front trim is packed separately and
should be added after the oven is installed. The
oven door must be removed to install the
lower trim.
STOP POSITION
Fig. 3A
HINGE
Fig. 3B
Thetrim prov/descoo/ingair entryinto
cabinet through the bottomopening.
Thebottomopeningshouldnever be
blocked. See Fig. 3B.
Recycled Paper
4 -- Printed in the United States--