Advertisement
Fig. 1 -- SINGLE
OVEN
NOTE. Locate
an approved
junction
box
in the
suggested
location, a minimum of 23 7/8" above the
runners.
Be sure the oven support is solid enough to support
90 pounds.
Also be sure the oven support
is level
and straight.
There is no way to level
the oven
after installation.
/f a solid bottom is used instead of runners, a 6" x 10"
rectangle must be cut out of the bottom (See Fig. 1)
for optimum performance
and proper air circulation.
DIMENSIONS
A. Cabinet
Width
B. Cutout
Width
C. Cutout Height
D. Cutout Depth
E. Cutout
Location
H. Overall Height
W Overall
Width
24
_'
22 1/2"
27 5/8" Min. 28 1/8" Max.
23 1/2" Min.
32 1/2"
28 1/4"
23 3/4"
Equivalent
Runners
for over{ap
edges
to adjacent
corners,
drawers,
or wails, etc
Fig. 2 -- DOUBLE
OVEN
NOTE. Locate
an approved
junction
box
in the
suggested /ocaton, a m n mum of 48 'above the runners.
Be sure the oven support is solid enough to support
155 pounds. Also be sure the oven support is level
and straight.
There is no way to level the oven after
installation.
/f a solid bottom is used instead of runners, a 6" x 10"
rectangle must be cut out of the bottom (See Fig. 2)
for optimum performance
and proper air circulation.
DIMENSIONS
A.
Cabinet
Width
B.
Cutout
Width
C. Cutout Height
D. Cutout Depth
E.
Cutout Location
-
H. Overall Height
W Overall
Width
24" Min.
22 1/2"
48 1/8"
23 1/2" Min.
12 3/4" Min.
48 3/4"
23 3/4"
2" x 4" OR
9"
RUNNERS
i__ MJN .__
EQUIVALENT
_6, \
16"
2i"
_
MIN,
2
-_
20- MINIMUM CLEARANCE TO
ADJACENT CORNERS, DRAWERS.
OR WALLS, ETC.
JUNCTION
BOX
Advertisement
